Skip to main content

Waiting


28/10/00-Waiting....
Still waiting for the motors and gearboxes. Another parcel did arrive today, an Optimate III battery charger, which seems to be putting a bit of life back into my sad old Steatites. I will post how efficiently it worked after I get round to testing. My students are keen to see one of the robots so I may take KC1 in before he's stripped down, his gears and chains are providing some reduction gearing for our swimmer Keeler Carrot.
further comment...(26/4/02)
The Optimate has proved a complete boon. It wasn't cheap, about £40, but it works well, if slowly. I believe there is also a version called the Accumate now, that can be switched to cover 6 volt batteries.
Labels:

Comments

Post a Comment

Popular posts from this blog

Fake Plastic Trees...

So, for a bit of light relief I bought a few of Justin's LED Christmas tree kits. I think the original idea was to have a relatively easy kit to put together on Saturday workshops in the run up to Christmas, but they seem to have become quite popular with all manner of folk. Anyway, the kit is based around a couple of well made pcbs, a bag full of components, and the simple instruction that +ve is UP. It took about 10 mins to solder all the bits together, and with a huge amount of satisfaction over the end result. Justin and his Christmas tree kits can be found here: http://cyber-lane.com/ The Build Brighton Christmas workshops will be running each Saturday from 30th November to 21st December from 10am – 2pm. Entrance is completely free. Kits are priced between £2 and £5. #BuildBrighton can be found here: http://www.buildbrighton.com/blog/
Post a Comment
Read more

robot rebuilds

For two years in a row I've missed out joining in with Ian Watts robot bash at the Uni. So I'm making sure I've got something running before it swings around again. So I welded a couple of new gearbox cages into the 4 wheel push bot, and dug out a set of Electronize speed controllers. I fitted the titanium plate that has been cluttering the basement for a decade and have been doing some testing with a set of LiON batteries that used to belong to a cordless strimmer, which fell apart from overuse. I've run it up and the battery doesn't really have enough life to power 4 motors, but is useful for testing. I've stuck some old NiMH units on a charge cycle to see if they have enough life for a bout or two. The only things I actually need to "buy" are a 2.4GHz radio set, as the old 40MHz stuff is against the rules these days, so I've ordered a Hobby King 4 channel set for £20 off ebay. Strangely yesterday Mentorn emailed a bunch of robot folk to...
1 comment
Read more

The weakness of machines

All of the robots I have built have failed in fights, and usually at the axles/wheels, it's like a running joke. So why should it be any different with this featherweight? Meathammer was designed back in 2005/06 when using 4 drill motors was a bit of a novelty... it was made more novel still by mounting the epicyclic gear cages directly to the chassis, which unfortunately sends all the drive shocks back through the gearbox. The original version ran for a number of fights at modelworld 2006? and even won some, especially the sumo, which favoured its very low profile. I've just rebuilt the gearboxes with all metal gears, and tested it, and it seems it should last for at least one fight… but as I put it in the car after testing, I noted one of the wheels had nearly fallen off. Mark that bolt for Lockthreading! All this got me thinking if I could make something less likely to lose a wheel, break a gearbox etc I have a huge pile of bits and bobs that were destined for heavie...
1 comment
Read more